News center

How to ensure that the resistance does not affect the use of wiring terminals?
The wiring terminal editor believes that circuit engineers will pay close attention to the selected resistance value when selecting suitable wiring terminals when designing products, firstly to adapt to the current size of their own products, and secondly to ensure circuit safety.
Terminal blocks: Terminal blocks should have considerable stability in order to control the safe transmission of resistance. The contact value between the wiring terminal and the resistance is directly related to the service life of a terminal. If the resistance is too high, the terminal itself will have color changes, and the heat and voltage it bears will cause the protective film on the outside of the terminal to be burned, causing serious internal damage.
In addition, connecting terminals to various components of the starting appliance is also a very important component, so design requirements should be emphasized. The main requirement is not to exceed the size in the overall circuit, in order to ensure that the circuits can be perfectly connected during installation and will not cause significant damage to the entire set of circuits. Additionally, attention should be paid to the size of contact resistance and insulation resistance in circuit performance.
Innovation never stops, industry never waits. The emergence of insulation resistance precisely balances the contradiction between resistance and the use of wiring terminals. Insulation resistance is used to measure the insulation performance between the contact part of the wiring terminal, the connector, and the shell during this process. The design of this part itself has the function of blocking current, So if there are any positional errors during the installation process, this set of circuits may be damaged due to excessive resistance or inability to use at all.
So the wiring terminal editor reminds customers to pay attention to the current and voltage values of the wiring terminals when selecting and using them, and to control the electrical performance of the wiring terminals to ensure that the electrical flow is within a safe range. This way, the entire circuit will be smoother, and it can reduce the energy consumption of wiring terminals and maximize their service life.